2 layers Aluminium Circuit Board e nang le ENIG Surface finishing bakeng sa Leseli
Lintlha tsa tlhahiso
| Nomoro ea Mohlala: | PCB-A2 |
| Sephutheloana sa lipalangoang | Ho paka ka Vacuum |
| Setifikeiti | UL,ISO9001&ISO14001,RoHS |
| Litlhaloso | Sehlopha sa 2 sa IPC |
| Bonyane Sebaka/Mola | 0.075mm/3mil |
| Bokhoni ba Tlhahiso: | 10,000 sqm / khoeli le khoeli |
| Khoutu ea HS | 8534009000 |
| Tšimoloho: | E entsoe chaena |
Tlhaloso ea Sehlahisoa
Setsebi le Bokhoni
1.0W 2.0W 3.0W Aluminium PCB MCPCB LED Circuit Board e nang le UL, SGS, ISO
Lehlakore le le leng, le le leng le le leng le le leng le le leng le le leng le le leng la Multi-layer PCB.
Ho patoa/Ho foufala ka Via, ka Pad, Counter Sink Hole, Screw Hole(Counterbore), Press-fit, Half Hole.
HASL e se nang lead, khauta e qoelisoang / silevera / thini, OSP, khauta e pentiloeng/monoana, maske a peelable,
Maboto a Potoloho a hatisitsoeng a khomarela IPC Class 2 & 3 international PCB standard.
Bongata bo tloha ho prototype ho ea ho tlhahiso ea batch e mahareng le e kholo.
100% Teko ea E.
| Ntho | Spec. |
| Mekhahlelo | 1~2 |
| Tloaelehileng Qetella Boto Botenya | 0.3-5 limilimithara |
| Lintho tse bonahalang | Aluminium Base, Copper base |
| Boholo ba Panel | 1200mm*560mm(47in*22in) |
| Min Hole Size | 12mil(0.3mm) |
| Min Line Width/Space | 3mil(0.075mm) |
| Botenya ba Koporo ea Foil | 35μm-210μm(1oz-6oz) |
| Botenya bo Tloaelehileng ba Koporo | 18μm, 35μm, 70μm, 105μm. |
| Lula Botenya Mamello | +/-0.1mm |
| Mamello ea Outline Outline | +/-0.15mm |
| Mamello ea Outline ea Punching | +/-0.1mm |
| Mofuta oa Mask oa Solder | LPI(setšoantšo sa setšoantšo sa metsi) |
| Mini.Solder Mask Clearance | 0.05 limilimithara |
| Plug Hole Diameter | 0.25mm--0.60mm |
| Mamello ea Taolo ea Impedans | +/-10% |
| Qetello ea bokaholimo | Etella pele HASL ea mahala, khauta e qoelisoang (ENIG), seretse sa ho qoelisoa, OSP, jj |
| Mask ea solder | Tloaelo |
| Silkscreen | Tloaelo |
| Bokhoni ba Tlhahiso ea MC PCB | 10,000 sqm / khoeli le khoeli |
Nako ea ho etella pele ea Q / T
Joalo ka sejoale-joale, hangata re etsa aluminium PCB e le 'ngoe, athe ho thata haholo ho etsa PCB ea aluminium e mahlakoreng a mabeli.
| Molumo o Monyenyane oa Batch ≤1 sq mithara | Matsatsi a Tshebetso | Tlhahiso ea 'Misa ＞1 sq mithara | Matsatsi a Tshebetso |
| Lehlakore le le Leng | Matsatsi a 3-4 | Lehlakore le le Leng | Libeke tse 2-4 |
| Mahlakore a mabeli | Matsatsi a 6-7 | Mahlakore a mabeli | Libeke tse 2.5-5 |
Taolo ea Boleng
Lisebelisoa tse tsoetseng pele LIST
| Teko ea AOI | Licheke bakeng sa pente ea solder E hlahloba likarolo ho fihlela ho 0201 E hlahloba likarolo tse sieo, offset, likarolo tse fosahetseng, polarity |
| Tlhahlobo ea X-Ray | X-Ray e fana ka tlhahlobo e phahameng ea qeto ea: BGAs/Micro BGAs/Chip scale packages /Bare boards |
| Teko ea Potoloho | Teko ea In-Circuit hangata e sebelisoa mmoho le AOI e fokotsang mathata a tšebetso a bakoang ke mathata a likaroloana. |
| Teko ea Matla | Tlhahlobo e tsoetseng pele ea Mosebetsi Lenaneo la Sesebelisoa sa Flash Teko e sebetsang |
IOC tlhahlobo e tlang
SPI solder peista tlhahlobo
Tlhahlobo ea AOI ea inthaneteng
SMT tlhahlobo ea sengoloa sa pele
Kelo ya ka ntle
Tlhahlobo ea X-RAY-welding
BGA sesebelisoa bocha
QA tlhahlobo
Anti-static warehousing le thomello
Phehella tletlebo ea 0% ka boleng
Lisebelisoa tsohle tsa lefapha ho latela ISO le lefapha le amanang le lona le tlameha ho fana ka tlaleho ea 8D haeba boto efe kapa efe e ile ea senyeha.
Liboto tsohle tse tsoang li tlameha ho lekoa ka elektroniki ka 100%, ho lekoa ho thibela le ho soasoa.
E hlahlojoa ka pono, re etsa tlhahlobo ea microsection pele e romelloa.
Koetlisa maikutlo a basebetsi le setso sa rona sa khoebo, etsa hore ba thabele mosebetsi oa bona le k'hamphani ea rona, ho molemo ho bona ho hlahisa lihlahisoa tsa boleng bo holimo.
Lisebelisoa tse tala tsa boleng bo holimo (Shengyi FR4, ITEQ, Taiyo Solder Mask Ink joalo-joalo)
AOI e ka hlahloba sete kaofela, liboto lia hlahlojoa ka mor'a ts'ebetso ka 'ngoe
ABIS e Sebetsa Joang Mathata a Tlhahiso ea Aluminium PCB?
Lisebelisoa tse tala li laoloa ka thata: Sekhahla sa ho feta sa thepa e kenang ka holimo ho 99.9%.Palo ea litekanyetso tsa ho hana ka bongata e ka tlase ho 0.01%.
Copper Etching Controled: foil ea koporo e sebelisoang ho Aluminium PCBs e tenya ha e bapisoa.Haeba foil ea koporo e feta 3oz leha ho le joalo, etching e hloka matšeliso a bophara.Ka lisebelisoa tse phahameng tse nepahetseng tse tsoang Jeremane, bophara ba min / sebaka seo re ka se laolang se fihla ho 0.01mm.Puseletso ea bophara ba trace e tla raloa ka nepo ho qoba bophara ba trace ho tsoa ho mamello kamora ho etching.
Khatiso ea Mask ea boleng bo holimo ea Solder: Joalo ka ha bohle re tseba, ho na le bothata ba ho hatisa mask ea solder ea PCB ea aluminium ka lebaka la botenya ba koporo.Sena ke hobane haeba trace koporo e teteaneng haholo, joale setšoantšo se behiloeng se tla ba le phapang e kholo pakeng tsa trace surface le baseboard le khatiso ea mask ea solder e tla ba thata.Re tsitlallela ho litekanyetso tse phahameng ka ho fetisisa tsa oli ea mask ea solder ts'ebetsong eohle, ho tloha ho e 'ngoe ho ea ho khatiso ea mask ea solder ka makhetlo a mabeli.
Mechanical Manufacturing: Ho qoba ho fokotsa matla a motlakase a bakoang ke mokhoa oa ho etsa mechine, ho kenyelletsa ho cheka mechine, ho bōpa le ho kenya li-v-scoring joalo-joalo. Ka hona, bakeng sa tlhahiso e tlaase ea lihlahisoa, re etelletsa pele ho sebelisa mochine oa motlakase le setsebi sa setsebi sa ho sila.Hape, re ela hloko haholo ho lokisa mekhahlelo ea ho cheka le ho thibela burr ho hlahisa.
Setifikeiti
Tlhaloso ea Aluminium Based Copper-clad Laminate
| Ntho | Teko a | Tlhaloso: AL-01-P | AL-01-A Tlhaloso | AL-01-L Tlhaloso | Yuniti | |
| Thermal Conductivity | A | 0.8±20% | 1.3±20% | 2.0±20% | 3.0±20% | W/mK |
| Thermal Resistance | 0.85 | 0.65 | 0.45 | 0.3 | ℃W | |
| Solder Resistance | 288deg.c | 120 | 120 | 120 | 120 | Karolo |
| Matla a Peel Boemo bo Tloaelehileng | A Thermal | 1.2 | 1.2 | 1.2 | 1.2 | N/mm |
| Ho hanyetsa molumo Boemo bo Tloaelehileng | C-96/35/90 E- | 108 | 108 | 108 | 108 | MΩ.CM |
| Bokaholimo ba Resistivity Boemo bo Tloaelehileng | C-96/35/90 E- | 107 | 107 | 107 | 107 | MΩ |
| Dielectric Constant | C-96/35/90 | 4.2 | 4.9 | 4.9 | 4.9 | 1MH2 |
| Ntho ea ho senya | C-96/35/90 | ≤0.02 | ≤0.02 | ≤0.02 | ≤0.02 | 1MH2 |
| Ho Monyeha ha Metsi | 0.1 | 0.1 | 0.1 | 0.1 | % | |
| Sekhahla sa Volte | D-48/50+D-0.5/23 | 3 | 3 | 3 | 3 | KV/DC |
| Matla a Insulation | A | 30 | 30 | 30 | 30 | KV/mm |
| Phahamisa Camber | A | 0.5 | 0.5 | 0.5 | 0.5 | % |
| Flameability | UL94 | V-0 | V-0 | V-0 | V-0 | |
| CTi | IEC60112 | 600 | 600 | 600 | 600 | V |
| TG | 150 | 130 | 130 | 130 | ℃ | |
| Botenya ba Sehlahisoa | Skrine sa actinium se tenya: 1 oz ~ 15 oz, Boto ea aluminium e teteaneng: |
| Tlhaloso ea Sehlahisoa | 1000×1200 500×1200(mm) |
| • Sesebelisoa sa maqhubu a lentsoe, sebuela-hole, sebuela-hōle, capacitor e lefang, seholisa sa maqhubu a lentsoe, sehokahanyi sa pele, seholisa matla joalo-joalo. • Thepa ea phepelo ea motlakase: taolo ea letoto la motlakase, modulator ea switjha, le transducer ea DC-AC ... joalo-joalo. • Thepa ea elektronike ea mehala ea mehala ea maqhubu a phahameng a amplifier, mohala oa fiter, romella mohala oa thelekramo. • Ofisi ea othomathike: mokhanni oa printa, karolo e kholo ea ponts'o ea elektroniki le khatiso e futhumatsang ea A class. • Autocar the igniter, modulator phepelo ea motlakase le swap transformer mochini, selaoli sa phepelo ea motlakase, eba sistimi feela jj. • Khalkhuleita.Boto ea CPU, mokhanni o bonolo oa pan, le sesebelisoa sa phepelo ea motlakase ... jj. • Matla a hlobo ea matla: phetoho ea ho phalla mochine, relay e tiileng, borokho ba baeti joalo-joalo. • Leseli la LED, litšenyehelo tsa mocheso le metsi: matla a maholo a khanya ea LED, lerako la LED joalo-joalo | |
Mokhoa oa hau oa tlhahiso ke ofe?
LBH
E hlahlobiloe nakong ea lihora tse 12.Hang ha potso ea Moenjiniere le faele e sebetsang e hlahlobiloe, re tla qala tlhahiso.
Ka kakaretso matsatsi a 2-3 bakeng sa ho etsa sampole.Nako ea ho etella pele ea tlhahiso ea bongata e tla itšetleha ka bongata ba taelo le nako eo u behang taelo ka eona.
ISO9001, ISO14001,UL USA& USA Canada,IFA16949, SGS, RoHS report.
Re hlompha litokelo tsa bareki 'me ha ho mohla re tla etsa PCB bakeng sa ba bangngoele lifaele tsa hau ntle le haeba re fumana tumello e ngotsoeng ho tsoa ho uena, kapa re ke ke ra arolelana lifaele le batho ba bang.
Mekhoa ea rona ea ho netefatsa boleng ka tlase:
a), Tlhahlobo ea Pono
b), Sesebelisoa se fofang, sesebelisoa sa ho lokisa
c), Taolo ea tšitiso
d), ho lemoha bokhoni ba ho rekisa
e), microscope ea Digital metallog
f), AOI (Automated Optical Inspection)
Ee, re thabetse ho fana ka lisampole tsa mojule ho leka le ho lekola boleng, odara ea sampole e tsoakiloeng ea fumaneha.Ka kopo hlokomela hore moreki o lokela ho lefella litšenyehelo tsa ho romella.
Ka kopo, romella tlhahlobo ea lintlha ho rona, joalo ka Nomoro ea Ntho, Bongata ba ntho ka 'ngoe, Kopo ea Boleng, Letšoao, Melao ea Tefo, Mokhoa oa Lipalangoang, Sebaka sa Ts'ebetso, joalo-joalo. Re tla u etsetsa quotation e nepahetseng kapele kamoo ho ka khonehang.
Re fana ka thepa ho latela melao e behiloeng ke k'hamphani ea Express, ha ho sa na tefo e eketsehileng.
Sekhahla sa ho fana ka nako se feta 95%
a), Lihora tse 24 li fetoha ka potlako bakeng sa mohlala oa mahlakoreng a mabeli a PCB
b), lihora tse 48 bakeng sa likarolo tse 4-8 tsa mohlala oa PCB
c), hora e 1 bakeng sa qotso
d), lihora tse 2 bakeng sa potso ea moenjiniere / maikutlo a tletlebo
e), lihora tse 7-24 bakeng sa ts'ehetso ea tekheniki / tšebeletso ea taelo / ts'ebetso ea tlhahiso
