Customized Hard Gold PCB Board FR4 Rigid Multilayer PCB Manufacturing

Tlhaloso e Khutšoanyane:


  • Nomoro ea mohlala:PCB-A14
  • Lera: 4L
  • Boemo:40 * 40 limilimithara
  • Boitsebiso ba Motheo:FR4
  • Botenya ba Boto:1.6 limilimithara
  • Surface Funish:ENIG
  • Botenya ba Koporo:2.0oz
  • 'Mala oa mask oa solder:Botala
  • Theknoloji e Khethehileng:VIP
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Lintlha tsa Motheo

    Mohlala No. PCB-A14
    Sephutheloana sa lipalangoang Ho paka ka Vacuum
    Setifikeiti UL,ISO9001&ISO14001,RoHS
    Kopo Lisebelisoa tsa elektronike tsa bareki
    Bonyane Sebaka/Mola 0.075mm/3mil
    Bokhoni ba Tlhahiso 50,000 sqm/ khoeli
    Khoutu ea HS 853400900
    Tšimoloho E entsoe chaena

    Tlhaloso ea Sehlahisoa

    FR4 PCB Selelekela

    FR e bolela "lelakabe le thibelang mollo," FR-4 (kapa FR4) ke lebitso la sehlopha sa NEMA bakeng sa lisebelisoa tse matlafalitsoeng ka khalase ea epoxy laminate, thepa e kopantsoeng e entsoeng ka lesela le lohiloeng la fiberglass e nang le epoxy resin binder e etsang hore e be substrate e loketseng bakeng sa lisebelisoa tsa elektroniki. letlapeng la potoloho le hatisitsoeng.

    FR4 PCB Selelekela

    Melemo le Bokhopo ba FR4 PCB

    Lisebelisoa tsa FR-4 li tumme haholo ka lebaka la litšoaneleho tse ngata tse makatsang tse ka thusang liboto tsa potoloho tse hatisitsoeng.Ntle le ho theko e tlaase le ho sebetsa habonolo, ke insulator ea motlakase e nang le matla a phahameng haholo a dielectric.Ho feta moo, e tšoarella, ha e na mongobo, ha e na mocheso ebile e bobebe.

    FR-4 ke thepa e bohlokoa haholo, e tsebahalang haholo ka theko ea eona e tlase le botsitso ba mochini le motlakase.Le hoja thepa ena e na le melemo e mengata 'me e fumaneha ka mefuta e fapaneng ea botenya le boholo, ha se khetho e ntle ka ho fetisisa bakeng sa ts'ebeliso e' ngoe le e 'ngoe, haholo-holo lisebelisoa tsa maqhubu a phahameng joaloka meralo ea RF le microwave.

    Sebopeho sa li-PCB tse mahlakoreng a mabeli

    Li-PCB tse mahlakoreng a mabeli mohlomong ke mofuta o atileng haholo oa li-PCB.Ho fapana le li-PCB tsa lera le le leng, tse nang le lera la conductive ka lehlakoreng le leng la boto, PCB ea Mahlakore a Habeli e tla le lera la koporo le tsamaisang mahlakore ka bobeli a boto.Lipotoloho tsa elektronike ka lehlakoreng le leng la boto li ka kopanngoa ka lehlakoreng le leng la boto ka thuso ea likoti (vias) tse phunyeletsoeng ka boto.Bokhoni ba ho tšela litsela ho tloha holimo ho ea tlase bo eketsa haholo ho tenyetseha ha moetsi oa potoloho ho rala lipotoloho 'me e etsa hore ho be le sekhahla se eketsehileng sa potoloho.

    Sebopeho sa PCB se nang le mefuta e mengata

    Li-PCB tsa Multilayer li eketsa ho rarahana le ho teteana ha meralo ea PCB ka ho eketsa likarolo tse ling ho feta likarolo tse holimo le tse tlase tse bonoang libotong tse mahlakore a mabeli.Multilayer PCBs li hahiloe ka laminating le dikarolo tse sa tšoaneng.Likarolo tse ka hare, tseo hangata li nang le mapolanka a potoloho a mahlakoreng a mabeli, li koaletsoe hammoho, 'me li na le likarolo tse sireletsang pakeng le pakeng tsa foil ea koporo bakeng sa likarolo tse ka ntle.Likoti tse phuntsoeng ka boto (ka tsela) li tla etsa likhokahano le likarolo tse fapaneng tsa boto.

    Lisebelisoa tsa resin li tsoa kae ho ABIS?

    Boholo ba bona ba tsoa ho Shengyi Technology Co., Ltd. (SYTECH), eo e kileng ea e-ba moetsi oa bobeli oa CCL lefatšeng ka bophara ho latela boholo ba thekiso, ho tloha 2013 ho ea ho 2017. Re thehile likamano tsa nako e telele tsa tšebelisano ho tloha 2006. The FR4 resin material (Model S1000-2, S1141, S1165, S1600) li sebelisoa haholo-holo bakeng sa ho etsa liboto tsa potoloho tse hatisitsoeng ka mahlakoreng a mabeli hammoho le liboto tse nang le mekhahlelo e mengata.Lintlha tse mabapi le litšupiso tsa hau ke tsena.

    Bakeng sa FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA

    Bakeng sa CEM-1 & CEM 3: Sheng Yi, King Board

    Bakeng sa Maqhubu a Phahameng: Sheng Yi

    Bakeng sa Pheko ea UV: Tamura, Chang Xing ( * 'Mala o teng: Botala) Solder bakeng sa Lehlakore le le leng

    Bakeng sa Senepe sa Mokelikeli: Tao Yang, Resist (Filimi e Metsi)

    Chuan Yu ( * Mebala e teng : E tšoeu, e ka nahanoang ka Solder e Yellow, Purple, Red, Blue, Green, Black)

    Setsebi le Bokhoni

    ABIS e nang le phihlelo ea ho etsa lisebelisoa tse khethehileng bakeng sa PCB e thata, e kang: CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, joalo-joalo. Ka tlaase mona ke kakaretso e khutšoanyane ea FYI.

    Ntho Bokhoni ba Tlhahiso
    Layer Counts Likarolo tse 1-20
    Lintho tse bonahalang FR-4, CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, joalo-joalo.
    Botenya ba boto 0.10mm-8.00mm
    Boholo ba Boholo 600mmX1200mm
    Mamello ea Lethathamo la Boto + 0.10 limilimithara
    Mamello ea Botenya(t≥0.8mm) ±8%
    Mamello ea Botenya(t<0.8mm) ±10%
    Insulation Layer Teckness 0.075mm-5.00mm
    Minimum Line 0.075 limilimithara
    Sebaka se fokolang 0.075 limilimithara
    Out Layer Koporo Botenya 18um-350um
    Lera le ka Hare Botenya ba Koporo 17um--175um
    Sekoti sa ho Epa(Mechanical) 0.15mm--6.35mm
    Qete lesoba(Mechanical) 0.10mm-6.30mm
    Mamello ea Diameter(Mechanical) 0.05 limilimithara
    Ngoliso(Mechanical) 0.075 limilimithara
    Aspect ratio 16:1
    Mofuta oa Mask oa Solder LPI
    SMT Mini.Solder Mask Width 0.075 limilimithara
    Mini.Solder Mask Clearance 0.05 limilimithara
    Plug Hole Diameter 0.25mm--0.60mm
    Taolo ea impedance Ho mamellana ±10%
    Bokaholimo/phekolo HASL, ENIG, Chem, Tin, Flash Gold, OSP, Monoana oa Khauta
    Boto ea Double Side kapa Multilayer

    Mokhoa oa Tlhahiso ea PCB

    Ts'ebetso e qala ka ho rala Sebopeho sa PCB ho sebelisa software efe kapa efe ea meralo ea PCB / CAD Tool (Proteus, Eagle, Kapa CAD).

    Mehato e meng kaofela ke ea Ts'ebetso ea Tlhahiso ea Boto ea Potoloho e Hatelitsoeng e ts'oana le Single Sided PCB kapa Double Sided PCB kapa Multi-layer PCB.

    Mokhoa oa Tlhahiso ea PCB

    Nako ea ho etella pele ea Q / T

    Sehlopha Nako ea Ketapele ka ho Fetisisa Nako e Tloaelehileng ea ho Tsamaisa
    E mahlakore a mabeli Lihora tse 24 120hrs
    4 Mekhahlelo 48hrs 172hrs
    6 Mekhahlelo 72hrs 192hrs
    8 Mekhahlelo 96hrs 212hrs
    10 Mekhahlelo 120hrs lihora tse 268
    12 Layer 120hrs 280hrs
    14 Mekhahlelo 144 lihora 292hrs
    16-20 Mekhahlelo E itšetlehile ka litlhoko tse khethehileng
    Ka holimo ho 20 Layers E itšetlehile ka litlhoko tse khethehileng

    Ho falla ha ABIS ho laola FR4 PCBS

    Ho lokisetsa lesoba

    Ho tlosa lithōle ka hloko le ho lokisa liparamente tsa mochini oa ho phunya: pele o roala ka koporo, ABIS e ela hloko likoti tsohle ho FR4 PCB e tšoaroang ho tlosa litšila, ho se tsitse ha holim'a metsi le epoxy smear, masoba a hloekileng a tiisa hore ho khomarela ka katleho maboteng a lesoba. .hape, qalong ea ts'ebetso, litekanyetso tsa mochini oa drill li lokisoa ka nepo.

    Ho Lokisoa ha Sebaka

    Ho senya ka hloko: basebetsi ba rona ba theknoloji ba nang le phihlelo ba tla tseba esale pele hore tsela e le 'ngoe feela ea ho qoba liphello tse mpe ke ho lebella tlhokahalo ea ho sebetsana ka mokhoa o khethehileng le ho nka mehato e nepahetseng ho netefatsa hore ts'ebetso e etsoa ka hloko le ka nepo.

    Litefiso tsa Katoloso ea Mocheso

    E tloaetse ho sebetsana le lisebelisoa tse fapaneng, ABIS e tla khona ho sekaseka motsoako ho netefatsa hore o loketse.ebe ho boloka ts'epo ea nako e telele ea CTE (coefficient of thermal extension), e nang le CTE e ka tlaase, ho ka etsahala hore ebe e pentiloe ka likoti ke ho hlōleha ho tsoa ka makhetlo a mangata ka koporo e etsang li-interconnections tsa lera la ka hare.

    Katoloso

    ABIS laola potoloho e scaled-up ke liphesente tse tsebahalang ka tebello ea tahlehelo ena e le hore le dikarolo tla khutlela litekanyo bona e le-e etselitsoeng ka mor'a hore potoloho lamination ka ho feletseng.hape, ho sebelisa likhothaletso tsa motheo tsa sekala sa moetsi oa laminate hammoho le ka hare ho ntlo ya data dipalopalo taolo ya tshebetso, ho daela-ka lintlha sekaleng e tla ba ka tsela e lumellanang ha nako e ntse e ka hare ho tikoloho eo e itseng ea tlhahiso.

    Mochini

    Ha nako e fihla ea ho haha ​​​​PCB ea hau, ABIS etsa bonnete ba hore u khetha e na le lisebelisoa tse nepahetseng le boiphihlelo ho e hlahisa ka nepo tekong ea pele.

    Taolo ea Boleng

    ABIS Quality Mission
    Quality Workshop

    BIS e rarolla bothata ba aluminium PCB?

    Lisebelisoa tse tala li laoloa ka thata:Sekhahla sa ho feta sa thepa e kenang ka holimo ho 99.9%.Palo ea litekanyetso tsa ho hana ka bongata e ka tlase ho 0.01%.

    Copper Etching Controled:foil ea koporo e sebelisoang ho Aluminium PCBs e tenya ha e bapisoa.Haeba foil ea koporo e feta 3oz leha ho le joalo, etching e hloka matšeliso a bophara.Ka lisebelisoa tse phahameng tse nepahetseng tse tsoang Jeremane, bophara ba min / sebaka seo re ka se laolang se fihla ho 0.01mm.Puseletso ea bophara ba trace e tla raloa ka nepo ho qoba bophara ba trace ho tsoa ho mamello kamora ho etching.

    Khatiso ea Mask ea boleng bo holimo ea Solder:Joalo ka ha bohle re tseba, ho na le bothata ba ho hatisa mask ea solder ea PCB ea aluminium ka lebaka la botenya ba koporo.Sena ke hobane haeba trace koporo e teteaneng haholo, joale setšoantšo se behiloeng se tla ba le phapang e kholo pakeng tsa trace surface le baseboard le khatiso ea mask ea solder e tla ba thata.Re tsitlallela ho litekanyetso tse phahameng ka ho fetisisa tsa oli ea mask ea solder ts'ebetsong eohle, ho tloha ho e 'ngoe ho ea ho khatiso ea mask ea solder ka makhetlo a mabeli.

    Tlhahiso ea Mechini:E le ho qoba ho fokotsa matla a motlakase a bakoang ke mokhoa oa ho etsa mechine, ho kenyelletsa ho cheka ka mechine, ho bōpa le ho kenya li-v-scoring joalo-joalo.Hape, re ela hloko haholo ho lokisa mekhahlelo ea ho cheka le ho thibela burr ho hlahisa.

    Setifikeiti

    setifikeiti2 (1)
    setifikeiti2 (2)
    setifikeiti2 (4)
    setifikeiti2 (3)

    LBH

    1.Lifaele tsa ka tsa PCB li tla hlahlojoa neng?

    E hlahlobiloe nakong ea lihora tse 12.Hang ha potso ea Moenjiniere le faele e sebetsang e hlahlobiloe, re tla qala tlhahiso.

    2.U na le litifikeiti life?

    ISO9001, ISO14001,UL USA& USA Canada,IFA16949, SGS, RoHS report.

    3.U leka le ho laola boleng joang?

    Mekhoa ea rona ea ho netefatsa boleng ka tlase:

    a), Tlhahlobo ea Pono

    b), Sesebelisoa se fofang, sesebelisoa sa ho lokisa

    c), Taolo ea tšitiso

    d), ho lemoha bokhoni ba ho rekisa

    e), Digital metallo graphic microscope

    f), AOI (Automated Optical Inspection)

    4.Can u etsa li-PCB tsa ka ho tloha faeleng ea setšoantšo?

    Che, re ke ke ra khonaamohelalifaele tsa setšoantšo, haeba u se na tsonaGerberfaele, na o ka re romella sampole ho e kopitsa.

    Mokhoa oa ho kopitsa PCB&PCBA:

    A na u ka etsa li-PCB tsa ka ho tsoa faeleng ea setšoantšo

    5.How about your Quick Turn Service?

    Sekhahla sa ho fana ka nako se feta 95%

    a), Lihora tse 24 li fetoha ka potlako bakeng sa mohlala oa mahlakoreng a mabeli a PCB

    b), lihora tse 48 bakeng sa likarolo tse 4-8 tsa mohlala oa PCB

    c), hora e 1 bakeng sa qotso

    d), lihora tse 2 bakeng sa potso ea moenjiniere / maikutlo a tletlebo

    e), lihora tse 7-24 bakeng sa ts'ehetso ea tekheniki / tšebeletso ea taelo / ts'ebetso ea tlhahiso

    6.Na u na le MOQ ea lihlahisoa?Haeba ho joalo, bonyane ba palo ke bokae?

    ABIS ha e na litlhoko tsa MOQ bakeng sa PCB kapa PCBA.

    7.Na k'hamphani ea hau e nka karolo pontšong?Lintlha tse tobileng ke life?

    Re kenya letsoho lipontšong selemo se seng le se seng, ea morao-rao ke eaExpo Electronica&ElectronTechExpo naheng ea Russia ea April 2023. Lebella ketelo ea hau ka thabo.

    8.Ke mefuta efe ea liteko eo u nang le eona?

    ABlS e etsa tlhahlobo ea 100% ea pono le AOl hammoho le ho etsa liteko tsa motlakase, tlhahlobo ea motlakase o phahameng, tlhahlobo ea taolo ea impedance, likaroloana tse nyane, tlhahlobo ea mocheso oa mocheso, tlhahlobo ea solder, tlhahlobo ea ho tšepahala, tlhahlobo ea insulating resistance, tlhahlobo ea bohloeki ba ionic le tlhahlobo ea Ts'ebetso ea PCBA.

    9.Pre-Sale le Ka mor'a ho Thekisoa Tšebeletso?

    a), 1 Hora qotso

    b), lihora tse 2 tsa maikutlo a tletlebo

    c), 7 * 24 hora tšehetso botekgeniki

    d), 7*24 tšebeletso ea taelo

    e), 7 * 24 lihora tsa ho fana

    f), 7*24 tlhahiso ea matha

    10.Ke Bokhoni ba Tlhahiso ea lihlahisoa tse rekisoang tse chesang?
    Bokhoni ba tlhahiso ea lihlahisoa tse rekisoang tse chesang
    Habeli Side/Multilayer PCB Workshop Aluminium PCB Workshop
    Bokhoni ba Tekheniki Bokhoni ba Tekheniki
    Lisebelisoa tse tala: CEM-1, CEM-3, FR-4(High TG), Rogers, TELFON Lisebelisoa tse tala: Aluminium base, Copper base
    Lera: 1 lera ho 20 Layers Lera: 1 lera le 2 Layers
    Min.line bophara/sebaka: 3mil/3mil(0.075mm/0.075mm) Min.line bophara/sebaka: 4mil/4mil(0.1mm/0.1mm)
    Min.Soba sa boholo: 0.1mm(sekoti sa dirilling) Min.Boholo ba lesoba: 12mil(0.3mm)
    Max.Boto ea boholo: 1200mm * 600mm Boholo ba Boto: 1200mm* 560mm(47in* 22in)
    Botenya ba boto bo felile: 0.2mm- 6.0mm E felile botenya ba boto: 0.3 ~ 5mm
    Botenya ba koporo ea foil: 18um ~ 280um (0.5oz ~ 8oz) Botenya ba koporo ea foil: 35um ~ 210um (1oz ~ 6oz)
    Mamello ea lesoba la NPTH: +/-0.075mm, Mamello ea lesoba la PTH: +/-0.05mm Ho mamella boemo ba lesoba: +/-0.05mm
    Mamello ea kemiso: +/-0.13mm Mamello ea kemiso ea litsela: +/ 0.15mm;ho mamella kemiso ea ho otla: +/ 0.1mm
    Bokaholimo bo felile: HASL e se nang lead, khauta e qoelisoang(ENIG), silevera e qoelisoang, OSP, ho penta ka khauta, monoana oa khauta, INK ea Carbon. Bokaholimo bo felile: HASL ea mahala, khauta e qoelisoang (ENIG), silevera ea ho qoelisoa, OSP jj
    Mamello ea taolo ea impedance: +/-10% Lula ho mamella botenya: +/-0.1mm
    Bokhoni ba tlhahiso: 50,000 sqm / khoeli MC PCB Bokhoni ba tlhahiso: 10,000 sqm / khoeli

  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona