FR4 TG150 PCB Board Lipotoloho tse mahlakoreng a mabeli tse entsoeng ka khauta e thata ea 3u” le sink ea Counter/bore
Lintlha tsa Motheo
| Mohlala No. | PCB-A34 |
| Sephutheloana sa lipalangoang | Ho paka ka Vacuum |
| Setifikeiti | UL,ISO9001&ISO14001,RoHS |
| Kopo | Lisebelisoa tsa elektronike tsa bareki |
| Bonyane Sebaka/Mola | 0.075mm/3mil |
| Bokhoni ba Tlhahiso | 50,000 sqm/ khoeli |
| Khoutu ea HS | 853400900 |
| Tšimoloho | E entsoe chaena |
Tlhaloso ea Sehlahisoa
FR4 PCB Selelekela
FR e bolela "lelakabe le thibelang mollo," FR-4 (kapa FR4) ke lebitso la sehlopha sa NEMA bakeng sa lisebelisoa tse matlafalitsoeng ka khalase ea epoxy laminate, thepa e kopantsoeng e entsoeng ka lesela le lohiloeng la fiberglass e nang le epoxy resin binder e etsang hore e be substrate e loketseng bakeng sa lisebelisoa tsa elektroniki. letlapeng la potoloho le hatisitsoeng.
Melemo le Bokhopo ba FR4 PCB
Lisebelisoa tsa FR-4 li tumme haholo ka lebaka la litšoaneleho tse ngata tse makatsang tse ka thusang liboto tsa potoloho tse hatisitsoeng.Ntle le ho theko e tlaase le ho sebetsa habonolo, ke insulator ea motlakase e nang le matla a phahameng haholo a dielectric.Ho feta moo, e tšoarella, ha e na mongobo, ha e na mocheso ebile e bobebe.
FR-4 ke thepa e bohlokoa haholo, e tsebahalang haholo ka theko ea eona e tlase le botsitso ba mochini le motlakase.Le hoja thepa ena e na le melemo e mengata 'me e fumaneha ka mefuta e fapaneng ea botenya le boholo, ha se khetho e ntle ka ho fetisisa bakeng sa ts'ebeliso e' ngoe le e 'ngoe, haholo-holo lisebelisoa tsa maqhubu a phahameng joaloka meralo ea RF le microwave.
Sebopeho sa PCB se nang le mefuta e mengata
Li-PCB tsa Multilayer li eketsa ho rarahana le ho teteana ha meralo ea PCB ka ho eketsa likarolo tse ling ho feta likarolo tse holimo le tse tlase tse bonoang libotong tse mahlakore a mabeli.Multilayer PCBs li hahiloe ka laminating le dikarolo tse sa tšoaneng.Likarolo tse ka hare, tseo hangata li nang le mapolanka a potoloho a mahlakoreng a mabeli, li koaletsoe hammoho, 'me li na le likarolo tse sireletsang pakeng le pakeng tsa foil ea koporo bakeng sa likarolo tse ka ntle.Likoti tse phuntsoeng ka boto (ka tsela) li tla etsa likhokahano le likarolo tse fapaneng tsa boto.
Setsebi le Bokhoni
| ITEM | KHONO | ITEM | KHONO |
| Mekhahlelo | 1-20L | Koporo e teteaneng | 1-6OZ |
| Mofuta oa Lihlahisoa | HF(High-frequency) &(Radio Frequency) board, Imedance control board, HDIboard, BGA & Fine Pitch board | Mask ea solder | Nanya & Taiyo;LRI & Matt Red.botala, bosehla, bosweu, boputswa, botsho |
| Lisebelisoa tsa motheo | FR4(Shengyi China,ITEQ, KB A+,HZ),HITG,FrO6,Rogers,Taconic,Argon,Nalco lsola joalo-joalo | Felisitsoeng Surface | E Tlwaelehileng HASL,HASL e senang lead,FlashGold,ENIG (lmmersion Gold) OSP (Entek),lmmersion TiN,lmmersion Silver,Hard Gold |
| Kalafo e Khethehileng ea Boholimo | ENIG(Khauta e qoelisoang) + OSP, ENIG(Khauta e qoelisoang) + Monoana oa Khauta, Monoana oa Khauta o Khanyang, ho qoelisoaSlive + Monoana oa Khauta, Tin ea ho qoelisoa + Monoana oa Khauta | ||
| Tlhaloso ea Setsebi | Bonyane bophara ba mohala / lekhalo: 3.5/4mil (ho cheka laser) Bonyane bo boholo ba lesoba: 0.15 mm Ring e tlase ea selemo: 4mil Botenya ba Koporo bo phahameng: 6Oz Boholo ba Tlhahiso: 600x1200mm Botenya ba Boto: D/S: 0.2-70mm,Mulltilayer: 0.40-7.Omm Min Solder Mask Bridge: ≥0.08mm Karo-karolelano: 15:1 plugging vias bokgoni: 0.2-0.8mm | ||
| Mamello | Mamello ea masoba a kolobisitsoeng : ± 0.08mm(min±0.05) Mamello ea lesoba le sa kenngoeng: ±O.05min(min+O/-005mm kapa +0.05/Omm) Mamello ea Outline: ±0.15min(min±0.10mm) Teko ea tšebetso: Khanyetso e tsitsitseng: 50 ohms (e tloaelehileng) Matla a ho tlosa: 14N/mm Teko ea Khatello ea Mocheso: 265C.20 metsotsoana boima ba mask a solder: 6H E-test voltage: 50ov±15/-0V 3os Warp le Twist: 0.7% ( semiconductor test board 0.3%) | ||
Lisebelisoa tsa resin li tsoa kae ho ABIS?
Boholo ba bona ba tsoa ho Shengyi Technology Co., Ltd. (SYTECH), eo e kileng ea e-ba moetsi oa bobeli oa CCL lefatšeng ka bophara ho latela boholo ba thekiso, ho tloha 2013 ho ea ho 2017. Re thehile likamano tsa nako e telele tsa tšebelisano ho tloha 2006. The FR4 resin material (Model S1000-2, S1141, S1165, S1600) li sebelisoa haholo-holo bakeng sa ho etsa liboto tsa potoloho tse hatisitsoeng ka mahlakoreng a mabeli hammoho le liboto tse nang le mekhahlelo e mengata.Lintlha tse mabapi le litšupiso tsa hau ke tsena.
Bakeng sa FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
Bakeng sa CEM-1 & CEM 3: Sheng Yi, King Board
Bakeng sa Maqhubu a Phahameng: Sheng Yi
Bakeng sa Pheko ea UV: Tamura, Chang Xing ( * 'Mala o teng: Botala) Solder bakeng sa Lehlakore le le leng
Bakeng sa Senepe sa Mokelikeli: Tao Yang, Resist (Filimi e Metsi)
Chuan Yu (* E fumanehamebala: E tšoeu, e Ikokobelitsoeng ka Solder e mosehla, e Pherese, e Khubelu, e putsoa, e tala, e ntšo)
Mokhoa oa Tlhahiso ea PCB
Ts'ebetso e qala ka ho rala Sebopeho sa PCB ho sebelisa software efe kapa efe ea meralo ea PCB / CAD Tool (Proteus, Eagle, Kapa CAD).
Mehato e meng kaofela ke ea Ts'ebetso ea Tlhahiso ea Boto ea Potoloho e Hatelitsoeng e ts'oana le Single Sided PCB kapa Double Sided PCB kapa Multi-layer PCB.
Nako ea ho etella pele ea Q / T
| Sehlopha | Nako ea Ketapele ka ho Fetisisa | Nako e Tloaelehileng ea ho Tsamaisa |
| E mahlakore a mabeli | Lihora tse 24 | 120hrs |
| 4 Mekhahlelo | 48hrs | 172hrs |
| 6 Mekhahlelo | 72hrs | 192hrs |
| 8 Mekhahlelo | 96hrs | 212hrs |
| 10 Mekhahlelo | 120hrs | lihora tse 268 |
| 12 Layer | 120hrs | 280hrs |
| 14 Mekhahlelo | 144 lihora | 292hrs |
| 16-20 Mekhahlelo | E itšetlehile ka litlhoko tse khethehileng | |
| Ka holimo ho 20 Layers | E itšetlehile ka litlhoko tse khethehileng | |
Ho falla ha ABIS ho laola FR4 PCBS
Ho lokisetsa lesoba
Ho tlosa lithōle ka hloko le ho lokisa liparamente tsa mochini oa ho phunya: pele o roala ka koporo, ABIS e ela hloko likoti tsohle ho FR4 PCB e tšoaroang ho tlosa litšila, ho se tsitse ha holim'a metsi le epoxy smear, masoba a hloekileng a tiisa hore ho khomarela ka katleho maboteng a lesoba. .hape, qalong ea ts'ebetso, litekanyetso tsa mochini oa drill li lokisoa ka nepo.
Ho Lokisoa ha Sebaka
Ho senya ka hloko: basebetsi ba rona ba theknoloji ba nang le phihlelo ba tla tseba esale pele hore tsela e le 'ngoe feela ea ho qoba liphello tse mpe ke ho lebella tlhokahalo ea ho sebetsana ka mokhoa o khethehileng le ho nka mehato e nepahetseng ho netefatsa hore ts'ebetso e etsoa ka hloko le ka nepo.
Litefiso tsa Katoloso ea Mocheso
E tloaetse ho sebetsana le lisebelisoa tse fapaneng, ABIS e tla khona ho sekaseka motsoako ho netefatsa hore o loketse.ebe ho boloka ts'epo ea nako e telele ea CTE (coefficient of thermal extension), e nang le CTE e ka tlaase, ho ka etsahala hore ebe e pentiloe ka likoti ke ho hlōleha ho tsoa ka makhetlo a mangata ka koporo e etsang li-interconnections tsa lera la ka hare.
Katoloso
ABIS laola potoloho e scaled-up ke liphesente tse tsebahalang ka tebello ea tahlehelo ena e le hore le dikarolo tla khutlela litekanyo bona e le-e etselitsoeng ka mor'a hore potoloho lamination ka ho feletseng.hape, ho sebelisa likhothaletso tsa motheo tsa sekala sa moetsi oa laminate hammoho le ka hare ho ntlo ya data dipalopalo taolo ya tshebetso, ho daela-ka lintlha sekaleng e tla ba ka tsela e lumellanang ha nako e ntse e ka hare ho tikoloho eo e itseng ea tlhahiso.
Mochini
Ha nako e fihla ea ho haha PCB ea hau, ABIS etsa bonnete ba hore u khetha e na le lisebelisoa tse nepahetseng le boiphihlelo ho e hlahisa ka nepo tekong ea pele.
ABIS Quality Mission
Sekhahla sa ho feta sa thepa e kenang ka holimo ho 99.9%, palo ea litekanyetso tsa ho hana ka bongata ka tlase ho 0.01%.
Mehaho e netefalitsoeng ea ABIS e laola lits'ebetso tsohle tsa bohlokoa ho felisa litaba tsohle tse ka bang teng pele li hlahisoa.
ABIS e sebelisa software e tsoetseng pele ho etsa tlhahlobo e batsi ea DFM mabapi le data e kenang, 'me e sebelisa mekhoa e tsoetseng pele ea taolo ea boleng ho pholletsa le ts'ebetso ea tlhahiso.
ABIS e etsa tlhahlobo ea 100% ea pono le ea AOI hammoho le ho etsa tlhahlobo ea motlakase, tlhahlobo ea matla a phahameng a motlakase, tlhahlobo ea taolo ea impedance, likaroloana tse nyane, tlhahlobo ea mocheso oa mocheso, tlhahlobo ea solder, tlhahlobo ea ho tšepahala, tlhahlobo ea insulate resistance le tlhahlobo ea bohloeki ba ionic.
Setifikeiti
Ke Hobane'ng ha U re Khetha?
- Mechini ea Pick and Place ea maemo a holimo e phahameng e ka sebetsanang le likarolo tse ka bang 25,000 tsa SMD ka hora.
- Bokhoni bo phahameng ba phepelo ea 60K Sqm khoeli le khoeli-E fana ka molumo o tlase le tlhahiso ea PCB e batloang, le tlhahiso e kholo.
- Sehlopha sa boenjiniere ba litsebi-40 baenjiniere le ntlo ea bona ea lisebelisoa, e matla ho OEM.E fana ka likhetho tse peli tse bonolo: Tsebo ea Tloaelo le e Tloaelehileng ka botebo ka IPC Class II le III Standards
Re fana ka ts'ebeletso e felletseng ea EMS ho bareki ba batlang hore re bokelle PCB ho PCBA, ho kenyeletsoa prototypes, morero oa NPI, molumo o monyane le o mahareng.Re boetse re khona ho fumana likarolo tsohle tsa morero oa hau oa kopano oa PCB.Baenjineri ba rona le sehlopha sa mehloli ba na le boiphihlelo bo bongata indastering ea phepelo le indastering ea EMS, ba nang le tsebo e tebileng kopanong ea SMT e lumellang ho rarolla mathata ohle a tlhahiso.Litšebeletso tsa rona li boloka chelete e ngata, lia tenyetseha ebile lia tšepahala.Re khotsofetse bareki ho pholletsa le liindasteri tse ngata ho kenyeletsa bongaka, indasteri, likoloi le lisebelisoa tsa motlakase tsa bareki.
LBH
Ho netefatsa qotso e nepahetseng, etsa bonnete ba hore o kenyelletsa lintlha tse latelang bakeng sa projeke ea hau:
Tlatsa lifaele tsa GERBER ho kenyelletsa le lenane la BOM
l Bongata
l Nako ea ho fetoha
l Litlhoko tsa Panelization
l Litlhoko tsa Lisebelisoa
l Qetella litlhoko
l Khoutu ea hau ea tloaelo e tla fanoa ka lihora tse 2-24 feela, ho latela ho rarahana ha moralo.
E hlahlobiloe nakong ea lihora tse 12.Hang ha potso ea Moenjiniere le faele e sebetsang e hlahlobiloe, re tla qala tlhahiso.
Che, re ke ke ra amohela lifaele tsa setšoantšo, haeba u se na faele ea gerber, na u ka re romella sampole ho e kopitsa.
Mokhoa oa ho kopitsa oa PCB&PCBA:
Mekhoa ea rona ea ho netefatsa boleng ka tlase:
a), Tlhahlobo ea Pono
b), Sesebelisoa se fofang, sesebelisoa sa ho lokisa
c), Taolo ea tšitiso
d), ho lemoha bokhoni ba ho rekisa
e), Digital metallo graphic microscope
f), AOI (Automated Optical Inspection)
Ee, re thabetse ho fana ka lisampole tsa mojule ho leka le ho lekola boleng, odara ea sampole e tsoakiloeng ea fumaneha.Ka kopo hlokomela hore moreki o lokela ho lefella litšenyehelo tsa ho romella.
Sekhahla sa ho fana ka nako se feta 95%
a), Lihora tse 24 li fetoha ka potlako bakeng sa mohlala oa mahlakoreng a mabeli a PCB
b), lihora tse 48 bakeng sa likarolo tse 4-8 tsa mohlala oa PCB
c), hora e 1 bakeng sa qotso
d), lihora tse 2 bakeng sa potso ea moenjiniere / maikutlo a tletlebo
e), lihora tse 7-24 bakeng sa ts'ehetso ea tekheniki / tšebeletso ea taelo / ts'ebetso ea tlhahiso
ABlS e etsa tlhahlobo ea pono ea 100% le tlhahlobo ea AOl hammoho le tlhahlobo ea motlakase, tlhahlobo ea motlakase o phahameng, tlhahlobo ea impedance control, likaroloana tse nyane, tlhahlobo ea ho sisinyeha ha mocheso, tlhahlobo ea solder, tlhahlobo ea ho ts'epahala, tlhahlobo ea insulating resistance., tlhahlobo ea bohloeki ba ionicle tlhahlobo ea ts'ebetso ea PCBA.
| Bokhoni ba tlhahiso ea lihlahisoa tse rekisoang tse chesang | |
| Habeli Side/Multilayer PCB Workshop | Aluminium PCB Workshop |
| Bokhoni ba Tekheniki | Bokhoni ba Tekheniki |
| Lisebelisoa tse tala: CEM-1, CEM-3, FR-4(High TG), Rogers, TELFON | Lisebelisoa tse tala: Aluminium base, Copper base |
| Lera: 1 lera ho 20 Layers | Lera: 1 lera le 2 Layers |
| Min.line bophara/sebaka: 3mil/3mil(0.075mm/0.075mm) | Min.line bophara/sebaka: 4mil/4mil(0.1mm/0.1mm) |
| Min.Soba sa boholo: 0.1mm(sekoti sa dirilling) | Min.Boholo ba lesoba: 12mil(0.3mm) |
| Max.Boto ea boholo: 1200mm * 600mm | Boholo ba Boto: 1200mm* 560mm(47in* 22in) |
| Botenya ba boto bo felile: 0.2mm- 6.0mm | E felile botenya ba boto: 0.3 ~ 5mm |
| Botenya ba koporo ea foil: 18um ~ 280um (0.5oz ~ 8oz) | Botenya ba koporo ea foil: 35um ~ 210um (1oz ~ 6oz) |
| Mamello ea lesoba la NPTH: +/-0.075mm, Mamello ea lesoba la PTH: +/-0.05mm | Ho mamella boemo ba lesoba: +/-0.05mm |
| Mamello ea kemiso: +/-0.13mm | Mamello ea kemiso ea litsela: +/ 0.15mm;ho mamella kemiso ea ho otla: +/ 0.1mm |
| Bokaholimo bo felile: HASL e se nang lead, khauta e qoelisoang(ENIG), silevera e qoelisoang, OSP, ho penta ka khauta, monoana oa khauta, INK ea Carbon. | Bokaholimo bo felile: HASL ea mahala, khauta e qoelisoang (ENIG), silevera ea ho qoelisoa, OSP jj |
| Mamello ea taolo ea impedance: +/-10% | Lula ho mamella botenya: +/-0.1mm |
| Bokhoni ba tlhahiso: 50,000 sqm / khoeli | MC PCB Bokhoni ba tlhahiso: 10,000 sqm / khoeli |
a), 1 Hora qotso
b), lihora tse 2 tsa maikutlo a tletlebo
c), 7 * 24 hora tšehetso botekgeniki
d), 7*24 tšebeletso ea taelo
e), 7 * 24 lihora tsa ho fana
f), 7*24 tlhahiso ea matha
a), 1 Hora qotso
b), lihora tse 2 tsa maikutlo a tletlebo
c), 7 * 24 hora tšehetso botekgeniki
d),7*24 tšebeletso ea odara
e), phano ea lihora tse 7 * 24
f),7*24 tlhahiso ea tlhahiso
